Home > Other > Klockner Moeller > ZB Overload Relays >

ZB32-2.4

Eaton Moeller ZB32-2.4 Thermal Overload relay

 
Alternative Views:


Moeller ZB32-2.4 thermal overload relay with adjustments from 1.6 to 2.4 AMPS and mounts directly to any DILM17, DILM25 or DILM32 3 pole Moeller contactor. These single phase sensitive overloads are rated for Class 10 tripping, which means they will trip in 10 seconds or less in over current condition and also have the option for manual or automatic reset. A set of auxiliary contacts come standard on the ZB32-2.4, one normally open and one normally closed, and screw terminals provide for easy installation and removal for replacement.

Catalog Page / Specifications

List Price: $180.83
Our Price: $47.94
Savings: $132.89

Quantity in Stock:8

Availability : Stock - Can ship today if ordered prior to 4 p.m. EST
Product Code: ZB32-2.4


Moeller ZB32 Mounting Brackets:
Check here if you need a separate mounting bracket for attaching this ZB32 overload to DIN rail [Add $9.17]

Qty:  
Description Detailed Specifications
 
Modern motors are built with less metal, which means they dissipate less heat. This calls for the modern protection offered by IEC-style Class 10 overload relays...they trip in 10 seconds under locked rotor conditions. Most motor manufacturers today recommend this type of “close” protection.  All Moeller series ZB32 overload relays come with a host of standard features including phase-failure sensitivity, temperature compensation, test / reset buttons and a tripfree release. The auxiliary contacts of the relay disconnect the motor contactor and signal a fault. Moeller series relays can also be used for protecting EExe hazardous location motors.
Technical Specifications
  • Class 10 overload; trip response from 2 to 10 seconds
  • Ambient compensated, bimetallic overload tripping mechanism
  • Phase failure sensitive to IEC/EN 60947
  • Manual / Automatic reset button
  • Built-in NO and NC auxiliary contacts
  • Direct mount to DILM17-10, DILM17-01, DILM25-10, DILM25-01, DILM32-10, DILM32-01 contactors
  • Can be mounted separately only standard 35mm DIN rail with additional of ZB32-XEZ bracket