In stock orders ship the same day until 4 p.m. EST

Over $1 million in stock for same day shipping!

Text us an RFQ to 484.425.0652

Call us today!

877.334.7893

1 3
Square D / Telemecanique  |  SKU: LC1D65AP7
34% off

LC1D65AP7

$256.24 $386.40
Shipping calculated at checkout.
The Schneider Electric LC1D65AP7 is a 65 AMP, 3 pole contactor with a 230v50/60Hz AC coil. This IEC/UL contactor is rated for 20 H.P. @ 230 volt, 40 H.P. @ 460 volt 3 Phase and has 1 normally open and 1 normally closed base mounted auxiliary contacts. Two and four pole auxiliary contacts can be added to the LC1D65AP7 for additional signalling while thermal overload relays can be directly mounted for complete motor protection.

Need help finding the coil voltage? Click here to see a picture to help determine the location of the coil voltage for this contactor.

Looking for a lower rated contactor in the same series? Try the LC1D50AP7 which has the same dimensions but is rated for 50 AMPS and can handle slightly lower loads.

Out of Stock - Can ship in 2-3 weeks

Rated insulation voltage (Vi) : 690v UL/CSA Rated impulse withstand voltage (Vimp) : 8kV Conforming to standards : IEC 60947-1, 60947-4-1, VDE 0660, EN 60947-1, EN 60947-4-1. Degree of protection : Protection against direct finger contact IP 2X Ambient air temperature around the device : - 5 to + 55 °C (+23 to +131 °F) Rated operational voltage (Ve) : 1000V Control voltage limits : 0.85 to 1.1 Vac at 60 Hz Average consumption at 20 °C (68 °F) and at Vc : 220VA Mechanical durability of operating cycles : 16,000,000 Mechanical life at Uc : 30,000,000

D-line contactors and overload relays are available in 11 contactor ratings for the USA market for inductive motor applications up to 150 full-load amps and resistive loads up to 200 A. They offer motor control and overload protection for motors rated up to 100 hp at 480 Vac or 125 hp at 600 Vac. 3-pole and 4-pole contactor versions available. All contactors include built-in auxiliary contacts. All screw connections have IP20 rated touch-safe terminals with both North American and International terminal markings. D-line contactors can be panel mounted with screws or DIN rail mounted.

LC1D65AP7 is backordered and will ship as soon as it is back in stock.

Delivery and Shipping

We ship the same day on all in stock orders that are placed prior to 4 p.m. EST, Monday through Friday. We offer Flat Rate shipping ($9.00 for UPS Ground) and expedited shipping can be selected at checkout.

Schneider Electric (formerly Square D and Telemecanique) has introduced a new style to the low voltage D-line contactors. These 40-65 AMP contactors have the narrowest profile of any contactor this size in the industry. These new LC1D65AP7 slim line contactors are only 2.17 inches wide, as compared to the standard 3 inches wide of normal contactors for this AMP size. This lowers cost by reducing panel size for both small starters as well for your complex UL panel application.

The LC1D65AP7 has a 230 volt AC coil, is rated for 65 AMPS and has UL, CSA, IEC and CE approvals for use in a wide variety of applications. This 65 AMP contactor has finger safe terminals for protection to IP 2X and has a coil tolerance of +10% to -15% to suit all of your electrical needs.

MAXIMUM HORSEPOWERMAXIMUM CURRENT# OF POLESAUXILIARY
CONTACTS		CATALOG #COIL
VOLTAGE
Single PhaseThree PhaseInductive
AC-1 (A)		Resistive
AC-3 (A)		N.O.N.C.N.O.N.C.
115v HP230v HP200v HP230v HP460v HP575v HP
5102020405065803011LC1D65AP7230v50/60Hz

  • Visit our support center

    Expert help & advice

  • Check your order status

    Updates & tracking

  • Returns & exchanges

    All you need to know

  • Price-match guarantee

    Our promise to you
Back to top