IMC-Direct.com - Siemens, Eaton, Square D, Telemecanique Distributor
Eaton / Cutler Hammer
Square D / Telemecanique
Pepperl + Fuchs
Sprecher + Schuh
Site Help / FAQ
Sign up for our newsletter to get the latest news and specials!
Square D / Telemecanique
LC1D40A Schneider Electric 40 AMP, 3 pole contactor with an AC rated coil
(must specify voltage below)
- Rated for 10 H.P. @ 230 volt, 30 H.P. @ 460 volt 3 Phase and has 1 normally open and 1 normally closed base mounted auxiliary contacts
Need help finding the coil voltage?
Click here to see a picture to help determine the location of the coil voltage for this contactor.
List Price: $218.00
Ships same day up until 4 p.m. EST
1-2 days for item to ship for standard delivery
Can be shipped direct from manufacturer for next day delivery if out of stock at IMC-DIRECT warehouse
Quantity in Stock
Square D Coil Codes
Please select a coil voltage
24v50/60Hz AC Coil
120v50/60Hz AC Coil
220v50/60Hz AC Coil
480v50/60Hz AC Coil
Square D Auxiliary Contacts:
Click here to add an auxiliary contact block
LADN11 - Top Mount 1 NO and 1 NC [Add $11.39]
LADN20 - Top Mount 2 NO [Add $11.39]
LADN02 - Top Mount 2 NC [Add $11.39]
LAD8N11 - Side Mount 1 NO and 1 NC [Add $11.39]
LADN04 - Top Mount 4 NC [Add $22.83]
LADN13 - Top Mount 1 NO and 3 NC [Add $22.83]
LADN22 - Top Mount 2 NO and 2 NC [Add $22.83]
LADN31 - Top Mount 3 NO and 1 NC [Add $22.83]
LADN40 - Top Mount 4 NO [Add $22.83]
Schneider LRD3 Overloads:
Click here to add an overload relay
LRD325 - adjusts 16-25 AMPS [Add $52.86]
LRD332 - adjusts 23-32 AMPS [Add $52.86]
LRD340 - adjusts 30-40 AMPS [Add $52.86]
LRD350 - adjusts 37-50 AMPS [Add $52.86]
LRD365 - adjusts 48-65 AMPS [Add $52.86]
Schneider Electric (formerly Square D and Telemecanique) has introduced a new style to the low voltage D-line contactors. These 40-65 AMP contactors have the narrowest profile of any contactor this size in the industry. These new LC1D slim line contactors are only 2.17 inches wide, as compared to the standard 3 inches wide of normal contactors for this AMP size. This lowers cost by reducing panel size for both small starters as well for your complex UL panel application.
Click here for a catalog page of this LC1D40A contactor
# OF POLES
Rated insulation voltage (Vi) : 690v UL/CSA
Rated impulse withstand voltage (Vimp) : 8kV
Conforming to standards : IEC 60947-1, 60947-4-1, VDE 0660, EN 60947-1, EN 60947-4-1.
Degree of protection : Protection against direct finger contact IP 2X
Ambient air temperature around the device : - 5 to + 55 °C (+23 to +131 °F)
Rated operational voltage (Ve) : 1000V
Control voltage limits : 0.85 to 1.1 Vac at 60 Hz
Average consumption at 20 °C (68 °F) and at Vc : 220VA
Mechanical durability of operating cycles : 16,000,000
Mechanical life at Uc : 30,000,000
D-line contactors and overload relays are available in 11 contactor ratings for the USA market for inductive motor applications up to 150 full-load amps and resistive loads up to 200 A. They offer motor control and overload protection for motors rated up to 100 hp at 480 Vac or 125 hp at 600 Vac.
3-pole and 4-pole contactor versions available.
All contactors include built-in auxiliary contacts.
All screw connections have IP20 rated touch-safe terminals with both North American and International terminal markings.
D-line contactors can be panel mounted with screws or DIN rail mounted.
Share your knowledge of this product.
Be the first to write a review »